The friendly Operating System for the Internet of Things
phyWAVE-KW22 Board

Board specific implementations for the phyWAVE evaluation board. More...

Detailed Description

Files

file  pba-d-01-kw2x/include/board.h
 Board specific definitions for the phyWAVE evaluation board.
 

Functions

void board_init (void)
 Initialize board specific hardware, including clock, LEDs and std-IO.
 

LED pin definitions and handlers

#define LED0_PIN   GPIO_PIN(PORT_D, 6)
 
#define LED1_PIN   GPIO_PIN(PORT_D, 4)
 
#define LED2_PIN   GPIO_PIN(PORT_A, 4)
 
#define LED0_MASK   (1 << 6)
 
#define LED1_MASK   (1 << 4)
 
#define LED2_MASK   (1 << 4)
 
#define LED0_ON   (GPIOD->PCOR = LED0_MASK)
 
#define LED0_OFF   (GPIOD->PSOR = LED0_MASK)
 
#define LED0_TOGGLE   (GPIOD->PTOR = LED0_MASK)
 
#define LED1_ON   (GPIOD->PCOR = LED1_MASK)
 
#define LED1_OFF   (GPIOD->PSOR = LED1_MASK)
 
#define LED1_TOGGLE   (GPIOD->PTOR = LED1_MASK)
 
#define LED2_ON   (GPIOA->PCOR = LED2_MASK)
 
#define LED2_OFF   (GPIOA->PSOR = LED2_MASK)
 
#define LED2_TOGGLE   (GPIOA->PTOR = LED2_MASK)
 

Macro for button S1/S2.

#define BUTTON_PORT   PORTD
 
#define BUTTON_PIN   1
 
#define BUTTON_GPIO   GPIO_PIN(PORT_D, BUTTON_PIN)
 

KW2XRF configuration

{spi bus, cs pin, int pin, spi speed,}

#define KW2XRF_PARAMS_BOARD
 
#define KW2XRF_SHARED_SPI   0
 

Define the interface for the HDC1000 humidity sensor

#define HDC1000_I2C   (I2C_DEV(0))
 
#define HDC1000_ADDR   (0x43)
 

Define the interface for the MAG3110 magnetometer sensor

#define MAG3110_I2C   (I2C_DEV(0))
 
#define MAG3110_ADDR   (0x0E)
 

Define the interface for the MMA8652 tri-axis accelerometer sensor

#define MMA8652_I2C   (I2C_DEV(0))
 
#define MMA8652_ADDR   (0x1D)
 

Define the interface for the MPL3115A2 pressure sensor

#define MPL3115A2_I2C   (I2C_DEV(0))
 
#define MPL3115A2_ADDR   (0x60)
 

Define the interface for the TCS3772 light sensor

#define TCS37727_PARAMS
 

Define the interface for the TMP006 IR-Termopile sensor

#define TMP006_I2C   (I2C_DEV(0))
 
#define TMP006_ADDR   (0x41)
 

Macro Definition Documentation

#define KW2XRF_PARAMS_BOARD
Value:
{.spi = SPI_DEV(1), \
.spi_clk = SPI_CLK_10MHZ, \
#define KW2XDRF_PORT
MCU Port connected to Modem.
#define KW2XDRF_IRQ_PIN
Modem's IRQ Output (activ low)
#define KW2XDRF_PCS0_PIN
SPI Slave Select Pin.
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
#define SPI_DEV(x)
Default SPI device access macro.
Definition: spi.h:73

Definition at line 72 of file pba-d-01-kw2x/include/board.h.

#define TCS37727_PARAMS
Value:
{ .i2c = I2C_DEV(0), \
.addr = 0x29, \
.atime = TCS37727_PARAM_ATIME }
#define I2C_DEV(x)
Default I2C device access macro.
Definition: i2c.h:86

Definition at line 115 of file pba-d-01-kw2x/include/board.h.