cc110x board specific configuration More...

Detailed Description

cc110x board specific configuration

Author: Marian Buschsieweke maria.nosp@m.n.bu.nosp@m.schsi.nosp@m.ewek.nosp@m.e@ovg.nosp@m.u.de

#include "board.h"
#include "cc110x_settings.h"

Include dependency graph for cc110x_params.h:

Variables
static const cc110x_params_t	cc110x_params []
	CC110X initialization parameters.

Default parameters for the cc110x driver
These values are based on the msba2 board
#define	CC110X_PARAM_SPI SPI_DEV(0)
	SPI bus connected to CC110x.

#define	CC110X_PARAM_CS GPIO_PIN(1, 21)
	SPI-CS connected to CC110x.

#define	CC110X_PARAM_GDO0 GPIO_PIN(0, 27)
	GPIO connected to CC110x' GDO0 pin.

#define	CC110X_PARAM_GDO2 GPIO_PIN(0, 28)
	GPIO connected to CC110x's GDO2 pin.

#define	CC110X_PARAM_SPI_CLOCK SPI_CLK_5MHZ
	SPI clock frequency to use.

#define	CC110X_PARAM_CONFIG NULL
	PA table to use.

#define	CC110X_PARAM_CHANNELS (&cc110x_chanmap_868mhz_lora)
	Default channel map to use.

#define	CC110X_PARAMS
	Default initialization parameters of the CC110x driver.

Macro Definition Documentation

◆ CC110X_PARAM_CHANNELS

#define CC110X_PARAM_CHANNELS (&cc110x_chanmap_868mhz_lora)

Default channel map to use.

This must match to configuration you have chosen

Definition at line 93 of file cc110x_params.h.

◆ CC110X_PARAM_CONFIG

#define CC110X_PARAM_CONFIG NULL

PA table to use.

Choose the one matching the base frequency your transceiver uses, otherwise the TX power setting will be incorrect.

Default config to apply

If 868 MHz is used as base frequency, you can set this to NULL

Definition at line 80 of file cc110x_params.h.

◆ CC110X_PARAM_CS

#define CC110X_PARAM_CS GPIO_PIN(1, 21)

SPI-CS connected to CC110x.

Definition at line 40 of file cc110x_params.h.

◆ CC110X_PARAM_GDO0

#define CC110X_PARAM_GDO0 GPIO_PIN(0, 27)

GPIO connected to CC110x' GDO0 pin.

Definition at line 44 of file cc110x_params.h.

◆ CC110X_PARAM_GDO2

#define CC110X_PARAM_GDO2 GPIO_PIN(0, 28)

GPIO connected to CC110x's GDO2 pin.

Definition at line 48 of file cc110x_params.h.

◆ CC110X_PARAM_SPI

#define CC110X_PARAM_SPI SPI_DEV(0)

SPI bus connected to CC110x.

Definition at line 36 of file cc110x_params.h.

◆ CC110X_PARAM_SPI_CLOCK

#define CC110X_PARAM_SPI_CLOCK SPI_CLK_5MHZ

SPI clock frequency to use.

Definition at line 52 of file cc110x_params.h.

◆ CC110X_PARAMS

#define CC110X_PARAMS

Value:

        { \
        .spi      = CC110X_PARAM_SPI,  \
        .spi_clk  = CC110X_PARAM_SPI_CLOCK, \
        .cs       = CC110X_PARAM_CS,   \
        .gdo0     = CC110X_PARAM_GDO0, \
        .gdo2     = CC110X_PARAM_GDO2, \
        .patable  = CC110X_PARAM_PATABLE, \
        .config   = CC110X_PARAM_CONFIG, \
        .channels = CC110X_PARAM_CHANNELS, \
}

Default initialization parameters of the CC110x driver.

Definition at line 101 of file cc110x_params.h.

Variable Documentation

◆ cc110x_params

const cc110x_params_t cc110x_params[]

static

Initial value:

= {
    CC110X_PARAMS
}

CC110X initialization parameters.

Definition at line 118 of file cc110x_params.h.