The friendly Operating System for the Internet of Things
boards/z1/include/periph_conf.h
Go to the documentation of this file.
1 /*
2  * Copyright (C) 2014 INRIA
3  * 2015 Freie Universit├Ąt Berlin
4  *
5  * This file is subject to the terms and conditions of the GNU Lesser General
6  * Public License v2.1. See the file LICENSE in the top level directory for more
7  * details.
8  */
9 
21 #ifndef PERIPH_CONF_H
22 #define PERIPH_CONF_H
23 
24 #ifdef __cplusplus
25 extern "C" {
26 #endif
27 
33 #define CLOCK_CORECLOCK (8000000U)
34 
35 #define CLOCK_CMCLK CLOCK_CORECLOCK /* no divider programmed */
36 
42 #define TIMER_NUMOF (1U)
43 #define TIMER_BASE (TIMER_A)
44 #define TIMER_CHAN (3)
45 #define TIMER_ISR_CC0 (TIMERA0_VECTOR)
46 #define TIMER_ISR_CCX (TIMERA1_VECTOR)
47 
53 #define UART_NUMOF (1U)
54 #define UART_0_EN (1U)
55 
56 #define UART_USE_USCI
57 #define UART_BASE (USCI_0)
58 #define UART_IE (SFR->IE2)
59 #define UART_IF (SFR->IFG2)
60 #define UART_IE_RX_BIT (1 << 0)
61 #define UART_IE_TX_BIT (1 << 1)
62 #define UART_RX_PORT ((msp_port_t *)PORT_3)
63 #define UART_RX_PIN (1 << 5)
64 #define UART_TX_PORT ((msp_port_t *)PORT_3)
65 #define UART_TX_PIN (1 << 4)
66 #define UART_RX_ISR (USCIAB0RX_VECTOR)
67 #define UART_TX_ISR (USCIAB0TX_VECTOR)
68 
74 #define SPI_NUMOF (1U)
75 
76 /* SPI configuration */
77 #define SPI_USE_USCI
78 #define SPI_BASE (USCI_0_B_SPI)
79 #define SPI_IE (SFR->IE2)
80 #define SPI_IF (SFR->IFG2)
81 #define SPI_IE_RX_BIT (1 << 2)
82 #define SPI_IE_TX_BIT (1 << 3)
83 #define SPI_PIN_MISO GPIO_PIN(P3,2)
84 #define SPI_PIN_MOSI GPIO_PIN(P3,1)
85 #define SPI_PIN_CLK GPIO_PIN(P3,3)
86 
88 #ifdef __cplusplus
89 }
90 #endif
91 
92 #endif /* PERIPH_CONF_H */