boards/pic32-wifire/include/periph_conf.h File Reference

peripheral configuration for the Digilent PIC32 WiFire More...

Detailed Description

peripheral configuration for the Digilent PIC32 WiFire

Author
Neil Jones Neil..nosp@m.Jone.nosp@m.s@img.nosp@m.tec..nosp@m.com

Definition in file boards/pic32-wifire/include/periph_conf.h.

#include "periph_cpu.h"
+ Include dependency graph for boards/pic32-wifire/include/periph_conf.h:
+ This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros

#define PERIPHERAL_CLOCK   (100000000) /* Hz */
 The peripheral clock is required for the UART Baud rate calculation It is configured by the 'config' registers (see pic32_config_settings.c)
 
Timer definitions
#define TIMER_NUMOF   (1)
 
#define TIMER_0_CHANNELS   (3)
 
UART Definitions
     There are 6 UARTS available on this CPU.

We route debug via UART4 on this board, this is the UART connected to the FTDI USB <-> UART device.

Note Microchip number the UARTS 1->4.

#define UART_NUMOF   (6)
 
#define DEBUG_VIA_UART   (4)
 
#define DEBUG_UART_BAUD   (9600)