periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-l073rz board. More...

Detailed Description

Peripheral MCU configuration for the nucleo-l073rz board.

Author
Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de
Alexandre Abadie alexa.nosp@m.ndre.nosp@m..abad.nosp@m.ie@i.nosp@m.nria..nosp@m.fr

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "l0/cfg_clock_32_16_1.h"
#include "cfg_rtt_default.h"
#include "cfg_timer_tim2.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

UART configuration

#define UART_0_ISR   (isr_usart2)
 
#define UART_1_ISR   (isr_usart1)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

PWM configuration

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)
 
static const pwm_conf_t pwm_config []
 

SPI configuration

Note
The spi_divtable is auto-generated from cpu/stm32_common/dist/spi_divtable/spi_divtable.c
#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const uint8_t spi_divtable [2][5]
 
static const spi_conf_t spi_config []
 

ADC configuration

#define ADC_CONFIG
 
#define ADC_NUMOF   (6U)
 

I2C configuration

#define I2C_0_ISR   isr_i2c1
 
#define I2C_1_ISR   isr_i2c2
 
#define I2C_NUMOF   ARRAY_SIZE(i2c_config)
 
static const i2c_conf_t i2c_config []
 

Macro Definition Documentation

◆ ADC_CONFIG

#define ADC_CONFIG
Value:
{ \
{ GPIO_PIN(PORT_A, 0), 0 }, \
{ GPIO_PIN(PORT_A, 1), 1 }, \
{ GPIO_PIN(PORT_A, 4), 4 }, \
{ GPIO_PIN(PORT_B, 0), 8 }, \
{ GPIO_PIN(PORT_C, 1), 11 },\
{ GPIO_PIN(PORT_C, 0), 10 } \
}
port C
Definition: periph_cpu.h:38
port A
Definition: periph_cpu.h:36
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35
port B
Definition: periph_cpu.h:37

Definition at line 152 of file periph_conf.h.

Variable Documentation

◆ i2c_config

const i2c_conf_t i2c_config[]
static
Initial value:
= {
{
.dev = I2C1,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 8),
.sda_pin = GPIO_PIN(PORT_B, 9),
.scl_af = GPIO_AF4,
.sda_af = GPIO_AF4,
.bus = APB1,
.rcc_mask = RCC_APB1ENR_I2C1EN,
.irqn = I2C1_IRQn
},
{
.dev = I2C2,
.speed = I2C_SPEED_NORMAL,
.scl_pin = GPIO_PIN(PORT_B, 13),
.sda_pin = GPIO_PIN(PORT_B, 14),
.scl_af = GPIO_AF5,
.sda_af = GPIO_AF5,
.bus = APB1,
.rcc_mask = RCC_APB1ENR_I2C2EN,
.irqn = I2C2_IRQn
}
}
use alternate function 4
APB1 bus.
use alternate function 5
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35
normal mode: ~100kbit/s
Definition: periph_cpu.h:116
port B
Definition: periph_cpu.h:37

Definition at line 168 of file periph_conf.h.

◆ pwm_config

const pwm_conf_t pwm_config[]
static
Initial value:
= {
{
.dev = TIM3,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.chan = { { .pin = GPIO_PIN(PORT_B, 4) , .cc_chan = 0 },
{ .pin = GPIO_PIN(PORT_C, 7) , .cc_chan = 1 },
{ .pin = GPIO_PIN(PORT_C, 8) , .cc_chan = 2 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 } },
.af = GPIO_AF2,
.bus = APB1
}
}
port C
Definition: periph_cpu.h:38
APB1 bus.
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35
use alternate function 2
port B
Definition: periph_cpu.h:37

Definition at line 92 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_UNDEF,
.af = GPIO_AF0,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2
}
}
use alternate function 0
port A
Definition: periph_cpu.h:36
APB2 bus.
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35

Definition at line 132 of file periph_conf.h.

◆ spi_divtable

const uint8_t spi_divtable[2][5]
static
Initial value:
= {
{
7,
5,
4,
2,
1
},
{
7,
5,
4,
2,
1
}
}

Definition at line 115 of file periph_conf.h.