periph_conf.h File Reference
#include "periph_cpu.h"
#include "f4/cfg_clock_96_8_1.h"
#include "cfg_i2c1_pb8_pb9.h"
#include "cfg_timer_tim5.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

UART configuration

#define UART_0_ISR   (isr_usart2)
 
#define UART_0_DMA_ISR   (isr_dma1_stream6)
 
#define UART_1_ISR   (isr_usart1)
 
#define UART_1_DMA_ISR   (isr_dma2_stream7)
 
#define UART_2_ISR   (isr_usart6)
 
#define UART_2_DMA_ISR   (isr_dma2_stream7)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

SPI configuration

Note
The spi_divtable is auto-generated from cpu/stm32_common/dist/spi_divtable/spi_divtable.c
#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const uint8_t spi_divtable [2][5]
 
static const spi_conf_t spi_config []
 

ADC configuration

Note that we do not configure all ADC channels, and not in the STM32F410 order.

Instead, we just define 6 ADC channels, for the Nucleo Arduino header pins A0-A5

#define ADC_NUMOF   (6U)
 
#define ADC_CONFIG
 

Macro Definition Documentation

◆ ADC_CONFIG

#define ADC_CONFIG
Value:
{ \
{GPIO_PIN(PORT_A, 0), 0, 0}, \
{GPIO_PIN(PORT_A, 1), 0, 1}, \
{GPIO_PIN(PORT_A, 4), 0, 4}, \
{GPIO_PIN(PORT_B, 0), 0, 8}, \
{GPIO_PIN(PORT_C, 1), 0, 11}, \
{GPIO_PIN(PORT_C, 0), 0, 10}, \
}
port C
Definition: periph_cpu.h:38
port A
Definition: periph_cpu.h:36
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35
port B
Definition: periph_cpu.h:37

Definition at line 143 of file periph_conf.h.

Variable Documentation

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_PIN(PORT_A, 4),
.af = GPIO_AF5,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2
}
}
port A
Definition: periph_cpu.h:36
APB2 bus.
use alternate function 5
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35

Definition at line 116 of file periph_conf.h.

◆ spi_divtable

const uint8_t spi_divtable[2][5]
static
Initial value:
= {
{
7,
6,
5,
2,
1
},
{
7,
7,
6,
3,
2
}
}

Definition at line 99 of file periph_conf.h.