Loading...
Searching...
No Matches
periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-f334r8 board. More...

Detailed Description

Peripheral MCU configuration for the nucleo-f334r8 board.

Author
Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de
Kaspar Schleiser kaspa.nosp@m.r.sc.nosp@m.hleis.nosp@m.er@f.nosp@m.u-ber.nosp@m.lin..nosp@m.de

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_timer_tim2.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

#define CONFIG_BOARD_HAS_LSE   1
 
#define CONFIG_BOARD_HAS_HSE   1
 

ADC configuration

Note that we do not configure all ADC channels, and not in the STM32F334 order.

Instead, we just define 6 ADC channels, for the Nucleo Arduino header pins A0-A5 and the internal VBAT channel.

#define VBAT_ADC   ADC_LINE(6)
 VBAT ADC line.
 
#define ADC_NUMOF   ARRAY_SIZE(adc_config)
 
static const adc_conf_t adc_config []
 

DMA streams configuration

#define DMA_0_ISR   isr_dma1_channel2
 
#define DMA_1_ISR   isr_dma1_channel3
 
#define DMA_2_ISR   isr_dma1_channel4
 
#define DMA_3_ISR   isr_dma1_channel7
 
#define DMA_NUMOF   ARRAY_SIZE(dma_config)
 
static const dma_conf_t dma_config []
 

UART configuration

#define UART_0_ISR   (isr_usart2)
 
#define UART_1_ISR   (isr_usart1)
 
#define UART_2_ISR   (isr_usart3)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

PWM configuration

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)
 
static const pwm_conf_t pwm_config []
 

SPI configuration

#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const spi_conf_t spi_config []
 

Macro Definition Documentation

◆ ADC_NUMOF

#define ADC_NUMOF   ARRAY_SIZE(adc_config)

Definition at line 62 of file periph_conf.h.

◆ CONFIG_BOARD_HAS_HSE

#define CONFIG_BOARD_HAS_HSE   1

Definition at line 30 of file periph_conf.h.

◆ CONFIG_BOARD_HAS_LSE

#define CONFIG_BOARD_HAS_LSE   1

Definition at line 25 of file periph_conf.h.

◆ DMA_0_ISR

#define DMA_0_ISR   isr_dma1_channel2

Definition at line 76 of file periph_conf.h.

◆ DMA_1_ISR

#define DMA_1_ISR   isr_dma1_channel3

Definition at line 77 of file periph_conf.h.

◆ DMA_2_ISR

#define DMA_2_ISR   isr_dma1_channel4

Definition at line 78 of file periph_conf.h.

◆ DMA_3_ISR

#define DMA_3_ISR   isr_dma1_channel7

Definition at line 79 of file periph_conf.h.

◆ DMA_NUMOF

#define DMA_NUMOF   ARRAY_SIZE(dma_config)

Definition at line 80 of file periph_conf.h.

◆ PWM_NUMOF

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)

Definition at line 160 of file periph_conf.h.

◆ SPI_NUMOF

#define SPI_NUMOF   ARRAY_SIZE(spi_config)

Definition at line 189 of file periph_conf.h.

◆ UART_0_ISR

#define UART_0_ISR   (isr_usart2)

Definition at line 136 of file periph_conf.h.

◆ UART_1_ISR

#define UART_1_ISR   (isr_usart1)

Definition at line 137 of file periph_conf.h.

◆ UART_2_ISR

#define UART_2_ISR   (isr_usart3)

Definition at line 138 of file periph_conf.h.

◆ UART_NUMOF

#define UART_NUMOF   ARRAY_SIZE(uart_config)

Definition at line 140 of file periph_conf.h.

◆ VBAT_ADC

#define VBAT_ADC   ADC_LINE(6)

VBAT ADC line.

Definition at line 61 of file periph_conf.h.

Variable Documentation

◆ adc_config

const adc_conf_t adc_config[]
static
Initial value:
= {
{ .pin = GPIO_PIN(PORT_A, 0), .dev = 0, .chan = 1 },
{ .pin = GPIO_PIN(PORT_A, 1), .dev = 0, .chan = 2 },
{ .pin = GPIO_PIN(PORT_A, 4), .dev = 1, .chan = 1 },
{ .pin = GPIO_PIN(PORT_B, 0), .dev = 0, .chan = 11 },
{ .pin = GPIO_PIN(PORT_C, 1), .dev = 1, .chan = 7 },
{ .pin = GPIO_PIN(PORT_C, 0), .dev = 1, .chan = 6 },
{ .pin = GPIO_UNDEF, .dev = 0, .chan = 17 },
}
@ PORT_B
port B
Definition periph_cpu.h:48
@ PORT_C
port C
Definition periph_cpu.h:49
@ PORT_A
port A
Definition periph_cpu.h:47
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition periph_cpu.h:46
#define GPIO_UNDEF
Definition of a fitting UNDEF value.

Definition at line 51 of file periph_conf.h.

◆ dma_config

const dma_conf_t dma_config[]
static
Initial value:
= {
{ .stream = 1 },
{ .stream = 2 },
{ .stream = 3 },
{ .stream = 6 },
}

Definition at line 69 of file periph_conf.h.

◆ pwm_config

const pwm_conf_t pwm_config[]
static
Initial value:
= {
{
.dev = TIM3,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.chan = { { .pin = GPIO_PIN(PORT_C, 6), .cc_chan = 0 },
{ .pin = GPIO_PIN(PORT_C, 7), .cc_chan = 1 },
{ .pin = GPIO_PIN(PORT_C, 8), .cc_chan = 2 },
{ .pin = GPIO_PIN(PORT_C, 9), .cc_chan = 3 } },
.af = GPIO_AF2,
.bus = APB1
}
}
@ GPIO_AF2
use alternate function 2
Definition cpu_gpio.h:104
@ APB1
Advanced Peripheral Bus 1
Definition periph_cpu.h:79

Definition at line 147 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_UNDEF,
.mosi_af = GPIO_AF5,
.miso_af = GPIO_AF5,
.sclk_af = GPIO_AF5,
.cs_af = GPIO_AF5,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2,
}
}
@ GPIO_AF5
use alternate function 5
Definition cpu_gpio.h:107
@ APB2
Advanced Peripheral Bus 2
Definition periph_cpu.h:80

Definition at line 167 of file periph_conf.h.

◆ uart_config

const uart_conf_t uart_config[]
static

Definition at line 87 of file periph_conf.h.