boards/nucleo-f334/include/periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-f334 board. More...

Detailed Description

#include "periph_cpu.h"
+ Include dependency graph for boards/nucleo-f334/include/periph_conf.h:

Go to the source code of this file.

Macros

Clock settings
Note
This is auto-generated from cpu/stm32_common/dist/clk_conf/clk_conf.c
#define CLOCK_CORECLOCK   (72000000U)
 
#define CLOCK_HSE   (8000000U)
 
#define CLOCK_LSE   (1)
 
#define CLOCK_AHB_DIV   RCC_CFGR_HPRE_DIV1
 
#define CLOCK_AHB   (CLOCK_CORECLOCK / 1)
 
#define CLOCK_APB1_DIV   RCC_CFGR_PPRE1_DIV2 /* max 36MHz */
 
#define CLOCK_APB1   (CLOCK_CORECLOCK / 2)
 
#define CLOCK_APB2_DIV   RCC_CFGR_PPRE2_DIV1 /* max 72MHz */
 
#define CLOCK_APB2   (CLOCK_CORECLOCK / 1)
 
#define CLOCK_PLL_PREDIV   (1)
 
#define CLOCK_PLL_MUL   (9)
 

Timer configuration

#define TIMER_0_ISR   (isr_tim2)
 
#define TIMER_NUMOF   (sizeof(timer_config) / sizeof(timer_config[0]))
 
static const timer_conf_t timer_config []
 

UART configuration

#define UART_0_ISR   (isr_usart2)
 
#define UART_NUMOF   (sizeof(uart_config) / sizeof(uart_config[0]))
 
static const uart_conf_t uart_config []
 

PWM configuration

#define PWM_NUMOF   (sizeof(pwm_config) / sizeof(pwm_config[0]))
 
static const pwm_conf_t pwm_config []
 

SPI configuration

Note
The spi_divtable is auto-generated from cpu/stm32_common/dist/spi_divtable/spi_divtable.c
#define SPI_NUMOF   (sizeof(spi_config) / sizeof(spi_config[0]))
 
static const uint8_t spi_divtable [2][5]
 
static const spi_conf_t spi_config []
 

Variable Documentation

◆ pwm_config

const pwm_conf_t pwm_config[]
static
Initial value:
= {
{
.dev = TIM3,
.rcc_mask = RCC_APB1ENR_TIM3EN,
.chan = { { .pin = GPIO_PIN(PORT_C, 6), .cc_chan = 0 },
{ .pin = GPIO_PIN(PORT_C, 7), .cc_chan = 1 },
{ .pin = GPIO_PIN(PORT_C, 8), .cc_chan = 2 },
{ .pin = GPIO_PIN(PORT_C, 9), .cc_chan = 3 } },
.af = GPIO_AF2,
.bus = APB1
}
}
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
use alternate function 2

Definition at line 103 of file boards/nucleo-f334/include/periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_A, 7),
.miso_pin = GPIO_PIN(PORT_A, 6),
.sclk_pin = GPIO_PIN(PORT_A, 5),
.cs_pin = GPIO_UNDEF,
.af = GPIO_AF5,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2
}
}
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
use alternate function 5
#define GPIO_UNDEF
Define custom value to speficy undefined or unused GPIOs.

Definition at line 143 of file boards/nucleo-f334/include/periph_conf.h.

◆ spi_divtable

const uint8_t spi_divtable[2][5]
static
Initial value:
= {
{
7,
6,
4,
2,
1
},
{
7,
7,
5,
3,
2
}
}

Definition at line 126 of file boards/nucleo-f334/include/periph_conf.h.

◆ timer_config

const timer_conf_t timer_config[]
static
Initial value:
= {
{
.dev = TIM2,
.max = 0xffffffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
}
}

Definition at line 62 of file boards/nucleo-f334/include/periph_conf.h.

◆ uart_config

const uart_conf_t uart_config[]
static
Initial value:
= {
{
.dev = USART2,
.rcc_mask = RCC_APB1ENR_USART2EN,
.rx_pin = GPIO_PIN(PORT_A, 3),
.tx_pin = GPIO_PIN(PORT_A, 2),
.rx_af = GPIO_AF7,
.tx_af = GPIO_AF7,
.bus = APB1,
.irqn = USART2_IRQn
}
}
use alternate function 7
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.

Definition at line 81 of file boards/nucleo-f334/include/periph_conf.h.