boards/nucleo-f302/include/periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-f302 board. More...

Detailed Description

#include "periph_cpu.h"
+ Include dependency graph for boards/nucleo-f302/include/periph_conf.h:
+ This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros

Clock system configuration
#define CLOCK_HSE   (8000000U) /* external oscillator */
 
#define CLOCK_CORECLOCK   (72000000U) /* desired core clock frequency */
 
#define CLOCK_PLL_MUL   (CLOCK_CORECLOCK / CLOCK_HSE)
 
#define CLOCK_AHB_DIV   RCC_CFGR_HPRE_DIV1
 
#define CLOCK_APB2_DIV   RCC_CFGR_PPRE2_DIV1
 
#define CLOCK_APB1_DIV   RCC_CFGR_PPRE1_DIV2
 
#define CLOCK_FLASH_LATENCY   FLASH_ACR_LATENCY_1
 
#define CLOCK_AHB   (CLOCK_CORECLOCK / 1)
 
#define CLOCK_APB2   (CLOCK_CORECLOCK / 1)
 
#define CLOCK_APB1   (CLOCK_CORECLOCK / 2)
 
ADC configuration
#define ADC_NUMOF   (0)
 
DAC configuration
#define DAC_NUMOF   (0)
 
I2C configuration
#define I2C_NUMOF   (2U)
 
#define I2C_0_EN   1
 
#define I2C_1_EN   1
 
#define I2C_IRQ_PRIO   1
 
#define I2C_APBCLK   (36000000U)
 
#define I2C_0_DEV   I2C1
 
#define I2C_0_CLKEN()   (periph_clk_en(APB1, RCC_APB1ENR_I2C1EN))
 
#define I2C_0_CLKDIS()   (periph_clk_dis(APB1, RCC_APB1ENR_I2C1EN))
 
#define I2C_0_EVT_IRQ   I2C1_EV_IRQn
 
#define I2C_0_EVT_ISR   isr_i2c1_ev
 
#define I2C_0_ERR_IRQ   I2C1_ER_IRQn
 
#define I2C_0_ERR_ISR   isr_i2c1_er
 
#define I2C_0_SCL_PORT   GPIOB
 
#define I2C_0_SCL_PIN   8
 
#define I2C_0_SCL_AF   4
 
#define I2C_0_SCL_CLKEN()   (periph_clk_en(AHB, RCC_AHBENR_GPIOBEN))
 
#define I2C_0_SDA_PORT   GPIOB
 
#define I2C_0_SDA_PIN   9
 
#define I2C_0_SDA_AF   4
 
#define I2C_0_SDA_CLKEN()   (periph_clk_en(AHB, RCC_AHBENR_GPIOBEN))
 
#define I2C_1_DEV   I2C3
 
#define I2C_1_CLKEN()   (periph_clk_en(APB1, RCC_APB1ENR_I2C3EN))
 
#define I2C_1_CLKDIS()   (periph_clk_dis(APB1, RCC_APB1ENR_I2C3EN))
 
#define I2C_1_EVT_IRQ   I2C3_EV_IRQn
 
#define I2C_1_EVT_ISR   isr_i2c3_ev
 
#define I2C_1_ERR_IRQ   I2C3_ER_IRQn
 
#define I2C_1_ERR_ISR   isr_i2c3_er
 
#define I2C_1_SCL_PORT   GPIOA
 
#define I2C_1_SCL_PIN   8
 
#define I2C_1_SCL_AF   3
 
#define I2C_1_SCL_CLKEN()   (periph_clk_en(AHB, RCC_AHBENR_GPIOAEN))
 
#define I2C_1_SDA_PORT   GPIOB
 
#define I2C_1_SDA_PIN   5
 
#define I2C_1_SDA_AF   8
 
#define I2C_1_SDA_CLKEN()   (periph_clk_en(AHB, RCC_AHBENR_GPIOBEN))
 

Timer configuration

#define TIMER_0_ISR   isr_tim2
 
#define TIMER_NUMOF   (sizeof(timer_config) / sizeof(timer_config[0]))
 
static const timer_conf_t timer_config []
 

UART configuration

#define UART_0_ISR   (isr_usart2)
 
#define UART_1_ISR   (isr_usart1)
 
#define UART_2_ISR   (isr_usart3)
 
#define UART_NUMOF   (sizeof(uart_config) / sizeof(uart_config[0]))
 
static const uart_conf_t uart_config []
 

PWM configuration

#define PWM_NUMOF   (sizeof(pwm_config) / sizeof(pwm_config[0]))
 
static const pwm_conf_t pwm_config []
 

SPI configuration

Note
The spi_divtable is auto-generated from cpu/stm32_common/dist/spi_divtable/spi_divtable.c
#define SPI_NUMOF   (sizeof(spi_config) / sizeof(spi_config[0]))
 
static const uint8_t spi_divtable [2][5]
 
static const spi_conf_t spi_config []
 

Variable Documentation

const pwm_conf_t pwm_config[]
static
Initial value:
= {
{
.dev = TIM16,
.rcc_mask = RCC_APB2ENR_TIM16EN,
.chan = { { .pin = GPIO_PIN(PORT_B, 4) , .cc_chan = 0 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 },
{ .pin = GPIO_UNDEF, .cc_chan = 0 } },
.af = GPIO_AF1,
.bus = APB2
}
}
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
use alternate function 1
#define GPIO_UNDEF
Define a custom GPIO_UNDEF value.

Definition at line 133 of file boards/nucleo-f302/include/periph_conf.h.

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI2,
.mosi_pin = GPIO_PIN(PORT_B, 15),
.miso_pin = GPIO_PIN(PORT_B, 14),
.sclk_pin = GPIO_PIN(PORT_B, 13),
.cs_pin = GPIO_PIN(PORT_B, 12),
.af = GPIO_AF5,
.rccmask = RCC_APB1ENR_SPI2EN,
.apbbus = APB1
}
}
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
use alternate function 5

Definition at line 173 of file boards/nucleo-f302/include/periph_conf.h.

const uint8_t spi_divtable[2][5]
static
Initial value:
= {
{
7,
6,
4,
2,
1
},
{
7,
7,
5,
3,
2
}
}

Definition at line 156 of file boards/nucleo-f302/include/periph_conf.h.

const timer_conf_t timer_config[]
static
Initial value:
= {
{
.dev = TIM2,
.max = 0xffffffff,
.rcc_mask = RCC_APB1ENR_TIM2EN,
.bus = APB1,
.irqn = TIM2_IRQn
}
}

Definition at line 70 of file boards/nucleo-f302/include/periph_conf.h.