Loading...
Searching...
No Matches
periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-f031k6 board. More...

Detailed Description

Peripheral MCU configuration for the nucleo-f031k6 board.

Author
Alexandre Abadie alexa.nosp@m.ndre.nosp@m..abad.nosp@m.ie@i.nosp@m.nria..nosp@m.fr
Vincent Dupont vince.nosp@m.nt@o.nosp@m.takey.nosp@m.s.co.nosp@m.m

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_timer_tim2.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

UART configuration

#define UART_0_ISR   (isr_usart1)
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 
static const uart_conf_t uart_config []
 

PWM configuration

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)
 
static const pwm_conf_t pwm_config []
 

SPI configuration

#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const spi_conf_t spi_config []
 

ADC configuration

#define VBAT_ADC   ADC_LINE(5)
 VBAT ADC line.
 
#define ADC_NUMOF   ARRAY_SIZE(adc_config)
 
static const adc_conf_t adc_config []
 

Macro Definition Documentation

◆ ADC_NUMOF

#define ADC_NUMOF   ARRAY_SIZE(adc_config)

Definition at line 130 of file periph_conf.h.

◆ PWM_NUMOF

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)

Definition at line 90 of file periph_conf.h.

◆ SPI_NUMOF

#define SPI_NUMOF   ARRAY_SIZE(spi_config)

Definition at line 113 of file periph_conf.h.

◆ UART_0_ISR

#define UART_0_ISR   (isr_usart1)

Definition at line 48 of file periph_conf.h.

◆ UART_NUMOF

#define UART_NUMOF   ARRAY_SIZE(uart_config)

Definition at line 50 of file periph_conf.h.

◆ VBAT_ADC

#define VBAT_ADC   ADC_LINE(5)

VBAT ADC line.

Definition at line 129 of file periph_conf.h.

Variable Documentation

◆ adc_config

const adc_conf_t adc_config[]
static
Initial value:
= {
{ GPIO_PIN(PORT_A, 0), 0 },
{ GPIO_PIN(PORT_A, 1), 1 },
{ GPIO_PIN(PORT_A, 3), 3 },
{ GPIO_PIN(PORT_A, 4), 4 },
{ GPIO_PIN(PORT_A, 7), 7 },
{ GPIO_UNDEF, 18 },
}
@ PORT_A
port A
Definition periph_cpu.h:47
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition periph_cpu.h:46
#define GPIO_UNDEF
Definition of a fitting UNDEF value.

Definition at line 120 of file periph_conf.h.

◆ pwm_config

const pwm_conf_t pwm_config[]
static

Definition at line 57 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = SPI1,
.mosi_pin = GPIO_PIN(PORT_B, 5),
.miso_pin = GPIO_PIN(PORT_B, 4),
.sclk_pin = GPIO_PIN(PORT_B, 3),
.cs_pin = SPI_CS_UNDEF,
.mosi_af = GPIO_AF0,
.miso_af = GPIO_AF0,
.sclk_af = GPIO_AF0,
.cs_af = GPIO_AF0,
.rccmask = RCC_APB2ENR_SPI1EN,
.apbbus = APB2
}
}
@ PORT_B
port B
Definition periph_cpu.h:48
@ GPIO_AF0
use alternate function 0
Definition cpu_gpio.h:102
#define SPI_CS_UNDEF
Define value for unused CS line.
Definition periph_cpu.h:363
@ APB2
Advanced Peripheral Bus 2
Definition periph_cpu.h:80

Definition at line 97 of file periph_conf.h.

◆ uart_config

const uart_conf_t uart_config[]
static
Initial value:
= {
{
.dev = USART1,
.rcc_mask = RCC_APB2ENR_USART1EN,
.rx_pin = GPIO_PIN(PORT_A, 15),
.tx_pin = GPIO_PIN(PORT_A, 2),
.rx_af = GPIO_AF1,
.tx_af = GPIO_AF1,
.bus = APB2,
.irqn = USART1_IRQn
}
}
@ GPIO_AF1
use alternate function 1
Definition cpu_gpio.h:103

Definition at line 35 of file periph_conf.h.